To manage a smart home, you need to have a working wireless network. Wireless networks are full of problems; sometimes they slow down or decide not to work at all. The poor performance affects the way various smart devices in the home operate. The following tips help you improve the performance of the network.
Have a Central Location
A central location provides standard signal strength across all the devices. If you live in a multi-storied building, then you also need to consider a floor that is central. For instance, place the router on the second floor in a 3-storied building so that it can provide a signal both on the devices that are located on the upper and lower floor.
Understand the Barriers
You need to understand the barriers to the wireless network. These are barriers that prevent the wireless network from reaching the devices. Some of the barriers include metal objects, walls, and floors which can easily interfere with the signal. Locate the router in a place that avoids these obstructions.
Get a High-gain Antenna
The antennas that come with the router are usually of unidirectional. This means that they broadcast the signal in all the directions. This can lead to a weaker signal due to signals that are lost. The good thing is that you can replace your antenna with one that can send the signal to a specific direction.
Replace the Network Adapter
Wireless signals are sent to and from the computer. At times this isn’t possible due to the device failing to send the signals back to the router. When this happens, you need to replace the network adapter on the computer. You can instead use a USB wireless adapter that has an external antenna for broader coverage. Check out http://www.thesmartfuture.net/network-adapter-buying-guide/ to get an idea of how to choose the right network adapter.
Incorporate a Repeated
You can use a wireless repeater, which is a device that rebroadcasts your wireless signal. The use of the repeater can help broadcast the signal to other areas of the building. You can place various repeaters all over the building depending on where the devices are located. However, you need to research these devices before you go ahead and invest in one of them. Without proper research, you might end up with a repeater that is hard to configure, and that might take your wireless signal performance lower.
Takeaway Tip: Go for Wireless-N
When you go in for new equipment, make sure you purchase wireless-N technology. This is twice as fast as wireless-G, which is more common.